Is the Netgear EX3700 extender refusing to connect with the router? Well, you’re not alone! Every third Netgear user is facing exactly the same issue. But, don’t worry because we have the back! In the following paragraphs, we’ve pointed out probably the most effective tips that’ll assist you to fix the extender not connecting towards the router issue very quickly! So, continue reading.
Fixed: Netgear EX3700 Extender Not Connecting to Router
Look into the Power
Let’s begin with the basics first. In case your Netgear EX3700 extender isn’t receiving enough power in the wall plug, then it’s quite apparent why it’s refusing to connect with the router. Your extender may not be through an sufficient power due to a broken wall plug. To repair the problem, either get the current wall plug fixed or plug your extender into another.
Lessen the Distance Between your Devices
One of the leading explanations why your Netgear EX3700 extender isn’t connecting towards the Wireless router happens because the space involving the devices is simply too much. Therefore, make certain that the Wireless products are put into close closeness. Now, check whether you’ll be able to resolve the problem or otherwise. Otherwise, then continue studying.
Look into the Ethernet Connection
One more reason why you’re tied to the Netgear EX3700 extender not connecting towards the router issue is due to a faulty Ethernet cable. Thus, check if the Ethernet cable connecting your devices is broken or otherwise. In situation it’s, then replaces it with a brand new one without thinking two times. Also, make certain the Ethernet connection is finger-tight.
Perform Netgear Firmware Update
Outdated firmware is yet another element in why your extender isn’t connecting towards the router. In case your extender is outdated, you very well may also face issues like, can’t access mywifiext.internet login page, being not able to alter the extender’s password, etc. So, it’s suggested that you simply update the firmware of the Netgear EX3700 extender immediately! Wondering how to achieve that? If the reply is yes, then it’s advised that you simply make reference to the consumer manual for that guidelines.
When the Wireless signals of the range extender are becoming interrupted, this too might stop your device from connecting towards the router. To trobleshoot and fix the problem, make sure that your Netgear extender is positioned not even close to Wireless-interference devices. Such devices include cordless phones, automatic washers, baby monitors, refrigerators, treadmills, televisions, microwaves, Bluetooth loudspeakers, etc.
Configure Your Router Correctly
When the aforementioned steps didn’t assist you to resolve the problem, then that’s most likely since your Netgear router isn’t configured correctly. So, make certain that the Wireless router is fully installed. Then, attempt to connect the Netgear EX3700 extender towards the router. Any luck? No? For the reason that situation, provide the next hack a go.
Reset Your Netgear EX3700 Extender
If even in the end the efforts you’ve made, your Netgear EX3700 extender continues to be not connecting towards the router, then it’s time you perform factory default reset.
Walkthrough the next steps to revive your Netgear Wireless range extender towards the default mode:
- Discover the Reset button found on your EX3700 extender.
- Once found, hold and press the button utilizing an oil pin.
- Use a toothpick or paper clip to press the Reset button.
- Release the button after just a few minutes.
After resetting your Netgear EX3700 extender, perform Netgear extender setup on your own.
To be able to execute a hassle-free Netgear EX3700 setup, your extender should connect with the Wireless router. If you’re facing issues while attempting to connect your extender towards the router, then following a tips pointed out in the following paragraphs will certainly assist you to repair the problem.