Top 6 Reasons your Toilet Get Clogged!

Please follow and like us:
Pin Share

Introduction

A good and functioning toilet is indispensable in every home. However, even though we all know the impact and usefulness of  a good toilet, we often do not pay attention to it until it there is a problem

A toilet is prone to clog, and several reasons may be responsible. It is also easy to detect a clogged toilet. For instance, toilet water overflowing is a sign of a completely clogged toilet, while weak flushing is a sign of a partially clogged toilet.

It is possible to unclog a clogged toilet but preventing it from clogging in the first place saves you from spending extra bucks on it. You also will not like the sight of a clogged toilet; hence, learning about some of the reasons your toilet gets clogged is important. With that, you can ensure that it does not get clogged. Check on this https://www.diamondbackplumbing.com/tempe-plumbers/ for detailed tips on toilet maintenance

The reason your toilet gets clogged

You have a low-flush toilet

The first thing to consider is the model of toilet you are using. With the newest models, there is a high chance that you will not have to deal with clogged toilets for a long time. However, where your house features a low-flush toilet, you may be dealing with a clogged toilet from time to time.

While many people prefer using a low-flush toilet since it saves a lot of money on water bills, it is important to take necessary precautions since this model has low water pressure and cannot push waste down the drain very well.

If you cannot install a new toilet model, ensure that you do not dump heavy waste like toilet paper rolls down the toilet.

Toilet S-Trap is clogged

Though installed for a specific purpose, the s-trap can cause the toilet to clog. This happens when the unit itself is clogged. With that, there is a consistent build of waste until you can see that the toilet is clogged. Also, flushing is obviously impossible, leading to overflowing.

Resolving this is possible with the use of a plunger, toilet snake, or clog dissolving solutions like baking soda. Ensure you use an ample amount and spread it around to cover as much surface area as possible to ensure proper removal of dirt, debris and other causes of clogging.

Once this is done, rinse it out with sufficient water, ensuring to cover and remove any off the added substances. One its been sufficiently rinsed, you should be able to test the toilet and note that there’s no clogging.

There isn’t sufficient water in the toilet tank

Sufficient water and the right pressure are required to properly flush the toilet. It is important to ensure that the tank is completely full before flushing the toilet; otherwise, the substances you flush away might not be washed away completely and remain within the piping, eventually leading to a blockage. Some organic substances are particularly prone to building up without sufficient water, as well as some minerals like calcium deposits.

If you start to experience problems with a clog, make sure that the supply valve is in good working condition. Also ensure there’s no blockages within the supply piping that might be reducing water intake. Check to see if water is getting inside the tank or if there is anything that might be preventing that. In most cases, you’ll be able to detect a problem and take steps to resolve the issue accordingly.

The connected drain line is clogged

The toilet seat and tank do not magically take out waste; they are connected to a specific drain line that further takes the waste out of the house. With this connection, your drain line must be functional if you must prevent the toilet from getting clogged.

A clogged drain line will eventually result in a clogged toilet because there is no movement of waste and water out of the house. To prevent this, it is recommended that you keep your drain line free by ensuring objects like paper, nylon, and hair that may clog it are not sent down the drain.

If you are already dealing with a clogged drain, ensure that you resolve that immediately to prevent it from affecting the toilet.

Flushing with hard water

Hard water refers to the presence of high minerals in the water, resulting in grains in the water. This is a major problem in some parts of the United States, like Glendale.

Continuous hard water usage is detrimental to the overall plumbing system and can affect your toilet. Hard water leaves a remnant of minerals which later calcify to form a white substance in your plumbing system. When this happens in the toilet, it can build to a clog and cause water overflow.

Though hard water is considered safe for drinking, there is a need to prevent it from causing plumbing problems. Hence, installing a water softener is one of the available ways to prevent this problem where you cannot get another water source.

Flushing materials that may clog the toilet

It is easy to want to put everything down the drain. Hence, we flush things like baby wipes, thicker toilet paper, and even hair with little or no hesitation. However, that should not be the case. Flushing these materials down your toilet can eventually clog it.

Finding a proper way of disposing of these materials is the only way to enjoy a toilet that does not end up clogged from time to time.

Conclusion

Proper maintenance of a plumbing system is imperative for a healthy lifestyle because the impact of a clogged stinking toilet surpasses the annoying and frustrating process of unclogging. It can impair your health and result in the entire house stinking horribly.

It is important to understand that clogging problems can arise from other factors, including problems with external pipes and installing a slow septic tank. Hence engaging a plumber to regularly maintain your plumbing system is an effective way to prevent clogging and related problems.

Please follow and like us:
Pin Share